Assembly Guide

Assembling the Oro bedframe without the need for tools is a breeze! Here are some handy tips to make the process smooth and hassle-free:

  • Organize Parts:

    Lay out all the bedframe components in an easily accessible area, making sure to keep them organized and within reach. The base pieces there are 4 for the head and foot and two for the center support. 

  • Follow Instructions:

    Lay out all the bedframe components in an easily accessible area, making sure to keep them organized and within reach. The base pieces there are 4 for the head and foot and two for the center support. 

  • Secure Slats:

    Ensure all slats are securely placed in the grooves. Avoid applying excessive pressure when inserting the slats and ensure they are at a right angle when installing. Slats should slide into position with minimal resistance. Some slats may have a slight curve to them and some pressure will be needed to fully insert. Ensure slats evenly slide into the 2 base pieces. 

  • Use Gravity:

    Take advantage of gravity by laying the bedframe components flat on the ground or on a stable surface. This will make it easier to align and connect the parts without the need for additional tools.

  • Check Stability:

    Periodically check the stability of the bedframe as you assemble it. Wiggle the frame gently to ensure that all connections are secure and there is no wobbling or movement.

  • Double-Check Connections:

    Once the bedframe is fully assembled, double-check all connections and joints to ensure they are secure. Check that all slats are firmly secured into place. Add a bit of pressure to fully seat the slats. Give the frame a gentle shake to test its stability before placing the mattress on top. 

Bed Frame Assembly

King

Queen

Double/Full

Twin

double_1_1_1

Step 1 – Layout the Base Pieces

Inside your box, you'll find:
4 Head/Foot Pieces
2 Center Support Pieces (with additional slotted grooves)
Lay out the base pieces in the order shown, with the center supports in the middle.

18 Slats with 4 Grooves, 17 Slats with 2 Grooves.

Step 2 – Join the Center Supports

Overlap the two center support pieces by 7 slots
Ensure the grooves are aligned and overlapping correctly.

image_37_2
king_3

Step 3 – Insert Center Slats

Locate the center slats (they have 4 grooves each).
Insert them into the center support using every second groove, as shown in the picture. Orientation matters—refer to the image for correct placement.

Step 4 – Add Opposite Slats

Insert the remaining slats facing the opposite direction. These will run perpendicular to the first set and add strength to the base.
Rectangle_121_3
Rectangle_122_3

Step 5 – Overlap at Head of Bed

At the head of the bed, overlap the base pieces by 4 slots.

Step 6 – Overlap at Foot of Bed

At the foot of the bed overlap by 5 slots.
Rectangle_123_3
Rectangle_124_4

Step 7 – Slide in Head/Foot Pieces

Carefully slide the Head and Foot Pieces into place and insert slats.
Tip: You may need to gently lift the center slats to guide the base pieces into position. Alignment is key—these slats lock the frame together for a sturdy build.

Step 8 – Complete Center Section

Insert any remaining center slats near the foot of the bed to overlap both base sections. Then complete the top portion of the bed with slats as shown.
Rectangle_125_4
Rectangle_126_3_99b29f8e-adad-4e82-a72c-0224b4a32fb6

Step 9 – Insert Side Slats

Continue placing slats along the outer edges to finish the platform surface.

Step 10 – Final Check

Your Oro Bed Frame is now fully assembled!
Note: The foot of the frame is slightly narrower than the head—this intentional design helps tuck it under the mattress and prevents tripping or catching when walking by.
Rectangle_127_3_a70912d1-33a8-4025-85ce-c94f6d6822a5
Mask_group_36

Step 1 – Layout the Base Pieces

Inside your box, you'll find:
4 Head/Foot Pieces
2 Center Support Pieces (with additional slotted grooves)
Lay out the base pieces in the order shown, with the center supports in the middle.

17 Slats with 4 Grooves, 10 Slats with 2 Grooves.

Step 2 – Join the Center Supports

Overlap the two center support pieces by 15 slots
Ensure the grooves are aligned and overlapping correctly.

Mask_group_37
queen_3

Step 3 – Insert Center Slats

Locate the center slats (they have 4 grooves each).
Insert them into the center support using every second groove, as shown in the picture. Orientation matters—refer to the image for correct placement.

Step 4 – Add Opposite Slats

Insert the remaining slats facing the opposite direction. These will run perpendicular to the first set and add strength to the base.
Rectangle_121_1
Rectangle_122_1

Step 5 – Overlap at Head of Bed

At the head of the bed, overlap the base pieces by 8 slots.

Step 6 – Overlap at Foot of Bed

At the foot of the bed overlap by 7 slots.
Rectangle_123_1
Rectangle_124_1

Step 7 – Slide in Head/Foot Pieces

Carefully slide the Head and Foot Pieces into place and insert slats.
Tip: You may need to gently lift the center slats to guide the base pieces into position. Alignment is key—these slats lock the frame together for a sturdy build.

Step 8 – Complete Center Section

Insert any remaining center slats near the foot of the bed to overlap both base sections. Then complete the top portion of the bed with slats as shown.
Rectangle_125_1
Rectangle_126_1

Step 9 – Insert Side Slats

Continue placing slats along the outer edges to finish the platform surface.

Step 10 – Final Fit

Your Oro Bed Frame is now fully assembled!
Note: The foot of the frame is slightly narrower than the head—this intentional design helps tuck it under the mattress and prevents tripping or catching when walking by.

Rectangle_127_1_59d49d89-e5dc-4477-808f-ee4655c877bc
double_1_1

Step 1 – Layout the Base Pieces

Inside your box, you'll find:
4 Head/Foot Pieces
2 Center Support Pieces (with additional slotted grooves)
Lay out the base pieces in the order shown, with the center supports in the middle.

15 Slats with 4 grooves, 14 slats with 2 grooves.

Step 2 – Join the Center Supports

Overlap the two center support pieces by 7 slots
Ensure the grooves are aligned and overlapping correctly.

image_37
double_3

Step 3 – Insert Center Slats

Locate the center slats (they have 4 grooves each).
Insert them into the center support using every second groove, as shown in the picture. Orientation matters—refer to the image for correct placement.

Step 4 – Add Opposite Slats

Insert the remaining slats facing the opposite direction. These will run perpendicular to the first set and add strength to the base.
Rectangle_121
Rectangle_122

Step 5 – Overlap at Head of Bed

At the head of the bed, overlap the base pieces by 4 slots.

Step 6 – Overlap at Foot of Bed

At the foot of the bed overlap by 3 slots.
Rectangle_123
Rectangle_124

Step 7 – Slide in Head/Foot Pieces

Carefully slide the Head and Foot Pieces into place and insert slats.
Tip: You may need to gently lift the center slats to guide the base pieces into position. Alignment is key—these slats lock the frame together for a sturdy build.

Step 8 – Complete Center Section

Insert any remaining center slats near the foot of the bed to overlap both base sections. Then complete the top portion of the bed with slats as shown.

Rectangle_125
Rectangle_126

Step 9 – Insert Side Slats

Continue placing slats along the outer edges to finish the platform surface.

Step 10 – Final Check

Your Oro Bed Frame is now fully assembled!
Note: The foot of the frame is slightly narrower than the head—this intentional design helps tuck it under the mattress and prevents tripping or catching when walking by.

Rectangle_127
twin_1

Step 1 – Layout the Base Pieces

Inside your box, you'll find:
4 Head/Foot Pieces
2 Center Support Pieces (with additional slotted grooves)
Lay out the base pieces in the order shown, with the center supports in the middle.

15 Slats with 4 Grooves, 2 slats with 2 grooves.

Step 2 – Join the Center Supports

Overlap the two center support pieces by 13 slots
Ensure the grooves are aligned and overlapping correctly.

twin_2
Mask_group_48

Step 3 – Insert Center Slats

Locate the center slats (they have 4 grooves each).
Insert them into the center support using every second groove, as shown in the picture. Orientation matters—refer to the image for correct placement.

Step 4 – Add Opposite Slats

Insert the remaining slats facing the opposite direction. These will run perpendicular to the first set and add strength to the base.
twin_4_2a62bdb5-4bc5-46e8-9913-b33976a916d8
twin_5_Head

Step 5 – Overlap at Head of Bed

At the head of the bed, overlap the base pieces by 7 slots.

Step 6 – Overlap at Foot of Bed

At the foot of the bed overlap all the way.
twin_6_Foot
twin_7

Step 7 – Slide in Head/Foot Pieces

Carefully slide the Head and Foot Pieces into place and insert slats.
Tip: You may need to gently lift the center slats to guide the base pieces into position. Alignment is key—these slats lock the frame together for a sturdy build.

Step 8 – Complete Center Section

Insert any remaining center slats near the foot of the bed to overlap both base sections. Then complete the top portion of the bed with slats as shown.

twin_8
twin_9

Step 9 – Insert Side Slats

Continue placing slats along the outer edges to finish the platform surface.

Step 10 – Final Look

Your Oro Bed Frame is now fully assembled!
Note: The foot of the frame is slightly narrower than the head—this intentional design helps tuck it under the mattress and prevents tripping or catching when walking by.

twin_10